The fork holds the front wheel, and the headset allows it to turn smoothly. A steering that catches, has play, or a damaged fork after a bump makes the bike inaccurate and dangerous. Rigid and suspended forks, headsets, spacers, and washers will restore your steering to good condition.
The rigid fork, made of steel or aluminium, is lightweight, straightforward and maintenance-free: it's the most common on city bikes. The suspended fork, with a spring, absorbs shocks from cobblestones and paths on a hybrid bike. To replace it, you need to respect the wheel size, the length and diameter of the steerer, as well as the type of brake.
Squeeze the front brake and push the bike back and forth: a clicking sound indicates play. If the handlebars stick or fall to one side when you lift the wheel, the bearings are damaged. A headset play can be adjusted, but needs replacement when the bearings are worn.
Cutting a steerer, inserting a headset ring or pressing cups requires specific tools. Replacing a complete fork or a headset is often done at a workshop. However, adjusting play can be done with common wrenches.
An electric bike, which is heavier and more speedy, puts more strain on the fork and headset. Choose a fork designed for this use, with disc brake mount and, if necessary, routing for the lighting cable or sensor. Have the headset checked at every service.
With a new fork, check the stem among the bars and stems, and the handles. The entire selection is in the bars, handles and steering.
P2R offers rigid forks for city and hybrid bikes, available in 700C and 650B, with threaded or smooth steerer.
Zoom offers suspended forks for hybrid bikes made from aluminium, compatible with V-Brake or disc brakes.
V Bike offers a hybrid fork for 28 inch wheels.
Forks and end-of-line headset parts are gathered in the clearance spare parts, and new arrivals in the new arrivals. Measure the length and diameter of your steerer.
A quill stem usually indicates a threaded steerer; a stem clamped around the steerer indicates a smooth steerer.
No, a twisted or cracked fork must be replaced: it's a safety part.
Yes, clean the legs and have the seals serviced regularly according to the manual.
Yes, provided you maintain a similar height to avoid changing the bike's geometry.
It depends on the diameter of the head tube and the steerer. Note down the measurements or the original reference.