Starting at £408.55
£283.05
On a rim brake bike, the brake pads are the wear part of the braking system: they grip the rim with every stop and wear out faster in the city and in the rain. Complete brake shoes or replacement rubbers, for V-Brake or calipers, for aluminium or steel rims: changing your pads restores strong braking.
The brake pads have grooves that show wear: when they disappear, the rubber is too thin and braking weakens. A hardened, cracked, or metal particle-embedded pad will scratch the rim and should also be replaced. Check them with every change of season, and more often if you ride a lot in the rain.
The complete pad holder is replaced as a block; the cartridge only replaces the rubber, which is more economical in the long run.
The rubber should be suited to the material of your rim. For an aluminium rim, standard rubber is sufficient. For a steel rim, common on older city bikes, specific rubber works better, especially in wet conditions. Rubbers designed for wet conditions maintain effectiveness in the rain.
The pad should touch the braking surface, never the tyre, flat and slightly pinched forward to avoid squeaking. Leave a gap of a few millimetres with the rim at rest, then tighten the fixture firmly. Clean the rim with soapy water after a muddy ride: mud and embedded particles wear out both pads and rim.
An electric bike with rim brakes wears its pads out faster due to its weight and speed. Check them more often and prefer rubbers that work well in the rain. If your rims wear out quickly, switching to disc brakes may be worth considering, if the frame allows it.
If the lever is stiff, check the levers, cables and housings. For a disc bike, check the disc brakes, pads and discs. You can find the entire selection in braking.
Shimano, a Japanese component manufacturer, offers R55C4 pad cartridges for calipers and original pads for its brakes.
XLC offers V-Brake pads, in boxes of 25 for workshops, and pads for hydraulic rim brakes Magura.
Fibrax provides city bike pad holders for calipers, including a version for wet conditions and steel rims.
Tektro, a Taiwanese brake manufacturer, offers pads for calipers and for V-Brake.
Alhonga provides pads for cantilever brakes, available individually or in packs.
End-of-line pads are gathered in the clearance spare parts, and new items are in the new arrivals. Always change pads in pairs.
The pad is often incorrectly oriented or dirty. Tilt it slightly forward and clean the rim.
No, choose a pad designed for V-Brake, with the correct length and type of fitting.
Change at least the pair of the same brake, for balanced braking.
If the track is scratched or grooved, check the rim's wear indicator.
It depends on your journeys and the weather. In the city, check them each season.